Products | Store | Support | Register | Media | Company  

Knowledge base ds760 Configuration software

Question #24
Can I see the actual gyro gain using the Flash-Link interface cable?
Answer
• Download and run the latest version of the PC software.
• Power on the helicopter/gyro and your transmitter.
• Right click anywhere on the top bar of the PC software and from the drop down list click on "Start Diagnostics".
• Over the large Spartan RC logo will appear a line of gray text which shows the sensor, rudder and gain signals read by the ds760's microcomputer. The actual operating gain is displayed as a % at the right hand side.
• To exit diagnostics mode right click on the top window bar and select "Stop diagnostics".
Back to Configuration software
Products | Store | Support | Register | Media | Company
  ©2004-2022 Spartan RC - T&Cs of access.
Home | Contact Us