Products | Store | Support | Register | Media | Company  

Knowledge base UltraPAC
Topics in UltraPAC
Topic Question Answer
72 As soon as I try to copy a model to the UltraPAC the radio starts beeping continuously. If you are using a 256K or 512K UltraPAC please check that the memory bank that you try to write to is not write protected.
73 The radio prompted me to initialise the UltraPAC which I did. But next time I powered on it asked... If you are using a 256K or 512K UltraPAC please check that the memory bank that you try to initialise is not write protected.
106 I initialised the UltraPAC with my Futaba 9Z and I can see the new "UNUSED" models 11 to 26 but I... Please read page 25 of your 9Z transmitter manual: "The CAMPac is not loaded with default models initially; they must be loaded with the Copy...
109 Is there a user guide on how the service menu works? Radio manufacturers intend that the service menu is used by their service centre staff only. As such, official user guides there are not publicly...
110 Does the Spartan UltraPAC work with my Robbe/Futaba radio? The radios listed below are known to be compatible with the UltraPAC. For other radios please follow the following advice: The UltraPAC communicates...
114 When initialising how long does It take? I have left it for a hour and doesn't seem to be doing... If you are using a 256K or 512K UltraPAC please check that the memory bank that you try to initialise is not write protected.
121 Can the UltraPAC be connected to the computer to read and edit model programs? You can use ToolPac to read, copy, backup and for some radios even edit model programs. ToolPac is a 3rd part software and simple hardware interface...

Back to Knowledge base
Products | Store | Support | Register | Media | Company
  ©2004-2022 Spartan RC - T&Cs of access.
Home | Contact Us